Fix Leaky Shower Faucet - Easy and Fast

"Fix leaky shower faucet in a jiffy", screamed the eyeball grabbing title of an article on the Internet. Now before you dismiss this as utter drivel, look beyond the hyperbolic headlines, and listen to what the experts have to say. Fixing that leaky shower faucet in your bathroom, and that too without any professional assistance, is not that prosperous a proposal. All it takes is a few very functional tools, a modicum of your time and a hard-to-torpedo attitude, and your leaky faucet becomes a thing of the past.

End To That Niggling Problem

Here's a tenuous contention that displays the traditional proclivity to raise the hackles. But before your temper assumes rampaging dimensions, take a look at how you can put an end to your consternation:

Cut off the water supply to the shower faucet, either in the bathroom or in the main cut off valve in the basement.

Open the faucet to drain the water in it completely.

Get to the root of the problem by removing the faucet handle screw, located underneath the snap on cover, with the help of a knife or screwdriver. This is achieved by turning the screw clockwise.

It's now time for the faucet handle to come off. At times, a slightly recalcitrant handle may be stuck to the stem, and comes out only after a few knocks with a hammer handle.

Look for the rubber gasket inside, and inspect its condition. In case it coats your hand with a black deposit, it's time to abandon it for a brand new one.

Place the new ring flat inside the shower head assembly. It's important to make sure that it fits perfectly.

Retighten the handle, without the use of too much force. Similarly, thread the shower head into its designated place.

The Moment You've Waited For

It's now time to turn on the water and see if you deserve a pat on the back. But what if things don't pan out the way you planned? Relax; just unscrew the shower head, re screw it, and tighten the handle a little more. If it's still as intractable as before, call a professional to bail you out.

Problem Shower Plumbing Headaches

Leaky faucets, clogged shower heads, cold water instead of hot and poor drainage are all a part of the headaches associated with shower plumbing. Most of us do not want to deal with these problems and will call a plumber. On the other hand, we want to save a little money and may decide the job will be easy and try it ourselves.

By knowing a few simple plumbing facts, you might be able to fix the shower stall yourself. You will need the right tools, but some jobs can be done relatively easy. It all depends on your determination and ability to do some simple steps.

The Shower is Clogged

The problem most people experience in the bathroom is the shower clog. The first thing to check with the shower plumbing is the drain cap to make sure it is free of hair and other debris. In addition, the drain has an inside part that sometimes collects hair and debris that flows through the drain cap. You need to remove the cap and then check to see if the clog appears in this area. You can use a wire of some kind to pull the clog out of the drain.

If you discover that these steps do not clear the shower plumbing problem, you next would try the plunger to see if you can loosen and debris that could be farther down the pipe. After plunging the drain a few times, you can run water to see if you have loosened the clog and the water now drains. If not, you may need to try one more thing before calling for help. Try some Drano and follow the directions and you should clear the clog if it is nothing more serious than a clogged drain.

Shower Plumbing and the Shower Installation

If you want to, you can install your own shower and plumbing [http://www.i-plumbing.com/Basement_Plumbing/] without the help of a plumber. Once you have your shower picked out and the plumbing materials in order, you can begin the installation project. You usually receive instructions to follow when installing the shower and plumbing; therefore, you need to follow the directions systematically.

After you turn off your water supply, you can then begin installing the pipes and then check for leaks before sealing up the wall. Many people put a mirror or something over the opening for quick and easy access in emergencies. After the showerhead and all plumbing are installed, you are ready for the first run. Turn the shower plumbing on and see how things flow. All should be fine if you followed directions. It is not very hard to install and fix problems with shower plumbing as long as you follow directions.